VAGCOM 16.8 VCDS 16.8 HEX+CAN-USB Interface Diagnose Cable
VAG COM 16.8 For AUDI VW SEAT SKODA:
Software Version: VCDS 16.8
Multi-Language: Deutsch/English/France
Support vehicle list: For AUDI VW SEAT SKODA
System requirement: Windows XP, Vista, 7, 8, 8.1, and 10(32-bit and 64-bit)
(It does not support Windows 95, 98, ME, and NT4 operating system)
Vagcom 16.8 Features:
1. Control module unit information
2. Read fault codes 004.01
3. Output test 005
Selective output test 005
4. Basic settings 006
5. Clear DTCs 004.10
6. Close control module 022
7. Pairs of coding control module (brush hidden) 007 (service 1A)
008 (Service 22) From the station control module 007 coding (service 1A)
008 (Service 22) Read measured value block 08 010.02 (KWP1281)
8. Advanced measurement reading
9. channel read 010.01
10. matching 012 014 (long)
11. Log (Known under KWP-2000 * Coding II) 015.01
12. View readiness 020.01 Guided ready state settings
13. security access 015.02
14. All supported DTCs
15. Common OBD-II function
16. Fault environmental data
17. Dual K-Line Support 7-PIN code 020.07
18. Upgrade to the latest fault code library
19. Direct CAN line diagnosis (Need to support diagnostic cables CAN line diagnosis)
20. Modes of transport 1001.03 (on)
1001.04 (off) (Need to support diagnostic cables CAN line diagnosis)
21. Advanced measurement block
22. Support for dual engine control module
Vagcom 16.8 Quick Guide:
VCDS software download the installation file from this page
Double-click the downloaded installation file, follow the steps to install the software correctly VCDS
You must VCDS software installed on your computer's hard drive!
If you run directly from other media VCDS software, the software may not run correctly
You can use a CD or USB flash drive to copy files to install VCDS on your computer hard drive you want to install, and then install it.
The appropriate diagnostic cable to connect the computer to the vehicle and
Turn the ignition switch of the vehicle, but it is not necessary to start the engine.
VCDS software program running
Click the [System Configuration], and then select the correct communications port
Click [Test] to confirm VCDS program can use the correct communications port, find diagnostic cables
Then click [Save]
You can now use all the features of the program VCDS. Ensure VCDS software can reliably access all the control modules that you have a vehicle to view the fault code. See the VCDS diagnostic system for vehicle applications list
You can also visit our website to see if VCDS software upgrade.
Vagcom 16.8 Note:
1. Version 16.8 must be used to Ross-Tech's HEX-, KEY-, KII-, or Micro-CAN series of "smart" diagnostic cables
2. You can not be used elsewhere to buy or produce their own diagnostic cable
3. VCDS Chinese program is installed by default in the following directory: C: Ross-Tech VCDS-ZHS
4. If you are using more than 7 operating system Windows Vista or Windows, please do not install the VCDS in the system Program Files directory
This article is complied by eobdtool.com. If you have advice or idea on it, pls feel free to let me know.
Email: sales07@eobdtool.com
WhatsApp: +86 13257589024
Wechat: 13257589024
Website: www.eobdtool.com
没有评论:
发表评论